Setting up the RepOne 3D Motion Sensor

Setting up the RepOne 3D Motion Sensor

Setting up a RepOne sensor for the first time is extremely simple, just follow these basic steps:

1. Turn on the sensor

Locate the switch on the bottom of the unit and turn it to the ON position, indicated by a "+" sign.

Unit not turning on or behaving as though the battery is low? Make sure to charge it using the included charging cable, as not all chargers are compatible.

2. Connect to the RepOne Personal app

Open the RepOne Personal app and go to the "Settings" tab. You'll see a list of RepOne device numbers, with yours present. Tap your device number to connect to it.

If you don't already have the app, search for RepOne Personal in your respective app store.

3. Tether to your target object

Place the magnetic base of the sensor on a metal object on the ground, like a plate or a rack. Take the tether and connect it to the barbell or other object you will be tracking using the included strap, or the roller magnet accessory if you have one.

4. Work out!

Head to the "Workout" tab of the app and begin to lift, you will see sets automatically created, which you can then fill in with set data like exercise name, load, etc. Remember to turn off your unit between sessions to conserve battery life.